Ready to craft glossy coasters or a stunning tabletop? Craft Resin makes it simple for beginners! If you’re new to resin, the options and steps can feel daunting—but don’t worry, we’ve got you covered. In this guide, we’ll answer three big beginner questions: what resin to pick, what supplies you’ll need, and how to mix it right. Our FAQ videos from the Craft Resin YouTube playlist will show you every step. New to resin? You’re in the right place — let’s make your first pour a win! Check out the full playlist here: Craft Resin FAQ Playlist.
Picking the Perfect Resin
Not sure where to start? Craft Resin’s standard formula is your beginner-friendly go-to. This 1:1 epoxy resin is perfect for coatings up to 1/4 inch (~6 mm) per pour — think tabletops, coasters, or even jewelry. It’s designed to be easy, with a smooth flow that’s forgiving for first-timers. Imagine pouring a glossy layer over a wooden tray or sealing a set of handmade coasters — it’s versatile enough for small crafts or layered builds if you want something thicker.
Why choose it? Craft Resin is crystal-clear, UV-resistant to prevent yellowing, and non-toxic once cured (certified safe under ASTM D-4236). Its low viscosity — around 1400 CPS when mixed — means it spreads nicely without being too runny, making it ideal for learning the ropes. Whether you’re dreaming of a shiny coaster or a sleek tabletop, this resin has you covered. Tip: Start with a small project like a coaster to get comfy with its smooth flow!
Gathering Your Resin Toolkit
Before you pour, you’ll need the right tools. Here’s your beginner’s checklist: grab some graduated mixing cups (marked for that 1:1 ratio), wooden stir sticks, nitrile gloves, a plastic drop cloth to catch drips, and a measuring tool like a small cup or syringe. These are your must-haves — without them, you’re stuck before you start! Want to level up? Add a heat gun to zap bubbles, silicone molds for fun shapes, and pigments to splash in some color.
Craft Resin’s non-toxic formula is safe once cured, but you’ll still want good ventilation during use — think open windows or a fan. A mask is optional but smart if you’re sensitive to smells. Quality matters here: cheap cups can leak, and thin gloves tear, so go for sturdy stuff. Tip: Order supplies with your Craft Resin kit from our shop — everything’s tested to work seamlessly together!
Mixing Resin Like a Pro
Now, let’s get that resin ready! Mixing Craft Resin is simple: measure equal parts Resin and Hardener (1:1 by volume) into a cup — say, 50 ml of each for a small project. Pour them in, then stir slowly with a stick, scraping the sides and bottom, for about 3 minutes until it’s clear and streak-free. Let it sit for a minute or two to settle — this helps bubbles rise out before you pour.
At around 1400 CPS mixed, Craft Resin feels fluid and blends easily — not too thick, not too runny, just right for beginners. Stirring too fast adds air, so keep it steady. Missed spots? You’ll end up with sticky patches later, so scrape those sides fully. Watch the video for the perfect swirl — it’s easier than it sounds!
Tip: Mix gently to keep bubbles low — slow and steady wins the glossy race!
Let’s Get Pouring!
You’ve picked Craft Resin, grabbed your supplies, and learned to mix — your first pour’s ready to shine! These basics make resin crafting a breeze for beginners. The standard Craft Resin formula is your trusty starter, flowing smoothly at 1400 CPS to give you a clear, bright finish every time. Watch the videos, start with a small project like a coaster, and build your confidence from there.
Ready to craft? Shop Craft Resin now for your beginner kit and pour your first masterpiece. Share it with us using #CraftResinFirstPour—we can’t wait to see what you create! Shop Now
